A Quick Guide to Netgear EX6400 (AC1900) Setup

The Netgear EX6400 (ac1900) setup consists totally of attaching your range extender to the router’s network. There are numerous means to set up a Netgear extender. The guidebook technique is the most effective strategy to configure your Netgear wifi range extender. The manual way requires seeing your tool’s web interface along with experiencing the web setup.

Another option for configuring your Netgear extender is to use the WPS button. WPS, or Wi-Fi Protected Configuration. The setup lets you attach your gadget to the router’s network with the flip of a button. However, it does not enable you to configure your wifi extender’s other settings.

You’ll be shocked to learn that you can likewise take care of the Netgear extender configuration using the Nighthawk application. The Nighthawk application allows you to link your extender to your wireless router.

In this post, we will certainly consider all of the possible Netgear wifi extender setup methods. We will certainly also talk about Netgear EX6400 (ac1900) setup issues later in this blog post. So let’s get started!

Steps for Netgear EX6400 (AC1900) Setup

The hands-on Netgear EX6400 (ac1900) setup method comprises of configuration using the web user interface. This is among one of the most effective techniques for configuring your Netgear wifi extender due to the fact that it permits you to define a variety of various other settings too. Comply with the instructions outlined below:

1. Most importantly, connect your wifi range extender right to a power socket near the router.
2. Primarily, switch On your extender as well as your computer.
3. Link your PC to the network of the extender after that.
4. Open your PC’s web browser as well as kind the default internet address into the address box.
5. Mywifiext.net is the default Netgear EX6400 (ac1900) setup address.
6. After that, press Enter, and you will be taken to the Netgear extender login screen.
7. Enter the default username as well as password in the login fields, then click Login.
8. You are now logged right into the Netgear wifi extender arrangement.
9. Go to the Netgear wifi range extender setup page, and your gadget will begin searching for active networks.
10. Select your house network from the listing as well as get in the password.
11. After that, configure your extender’s cordless setups and also click Save.
12. Ultimately, the Netgear EX6400 configuration will certainly be finished. The Netgear extender can presently be placed anywhere in your house.

Netgear EX6400 (AC1900) Setup via WPS 

To set up your Netgear extender making use of the WPS technique, you need to initially inspect that your router sustains the WPS technique. You need to find the WPS turn on your router. If it is there, it suggests that your router supports the WPS method for linking your extender. Adhere to the guidelines below:

1. Initially, turn On your Netgear wifi extender and also push the WPS switch.
2. After that, most likely to your Wi-fi router as well as push the WPS button.
3. Make sure you push the router’s button within 2 mins.
4. Wait a few seconds after that. The Netgear wifi range extender will connect to the network of your router.
5. Ultimately, the Netgear extender arrangement will certainly be finished.
6. At last, you can position your extender any place you like.

NOTE: Make sure you go about the Netgear extender firmware update as soon as you complete setting up your Netgear EX6400 extender. If you are unable to set up your device, please go about the Netgear extender reset. 

Steps for Netgear EX6400 Reset 

Follow these steps to reset your device to the factory default settings using a reset button. 

1. Firstly, locate the reset button on your extender. 
2. Press and hold the reset button for at least 10 seconds. 
3. After that, release the button and wait for a few seconds. 
4. At last, the Netgear extender reset process will be completed.

Conclusion 

This post was all about the Netgear EX6400 (AC1900) setup and installation. We discussed the two main methods that will help you set up your Netgear wireless range extender without any hassle. You just have to follow the aforementioned steps to configure your device. We suggest that you always use the web interface method to set up your Netgear EX6400 device as it allows for more features and functionality configuration. 

We hope you liked this post. If you encounter more such issues, make sure you get in touch with our support team for more help. 

FAQs