Netgear EX5000 Extender Setup

Complete Guide for Netgear EX5000 Extender Setup, Reset, & Firmware Update 

Netgear EX5000 setup helps you get your device up and running. As soon as you set up your Netgear extended, the device starts broadcasting an extended network at your premises. The Netgear wireless range extender works by picking up your router’s network and then increasing its throughput to reach distant areas.

Netgear extenders are some of the best yet most powerful extenders available on the market. However, you got to configure them properly in order to experience an optimized yet extended network. Therefore, we have brought this guide to help you with everything related to the Netgear extender. 

We will talk about the Netgear EX5000 setup, Netgear EX5000 reset, and Netgear EX5000 firmware update. Firstly, we will go about the setup process through multiple methods and then cover the rest of the topics. 

How to Setup my Netgear EX5000 Extender?

To go about the Netgear EX5000 setup and installation, there are two main methods. You can either set up your Netgear extender via the WPS method or through the manual method:

Netgear EX5000 wifi extender setup via WPS Method

  • First of all, make sure your router supports the WPS method of configuration. 
  • After that, plug your Netgear extender nearby the router. 
  • Turn On the Netgear extender and go about the Netgear EX5000 setup. 
  • Press the WPS button on your extender once and release it. 
  • Within two minutes, press the WPS button on your router as well. 
  • Give a few seconds to both devices. Let both devices pair. 
  • At last, the Netgear extender will be set up successfully.

Netgear EX5000 Wifi Extender Setup via Manual

  • To go about the Netgear EX5000 setup via the manual method, follow these steps. 
  • Make sure the Netgear extender is connected to the power supply. 
  • Connect your PC to the Netgear extender’s network. 
  • Open a web browser and type in the address bar. 
  • Hit Enter to reach the Netgear extender login page. 
  • Enter the username and password to access the Netgear EX5000 setup wizard. 
  • Follow the on-screen instructions to set up your extender with the router’s network. 
  • Finally, click Save or Apply. The configuration will save on your device and it will reboot. 
  • At last, the Netgear extender will be set up successfully. 

AC1200 EX5000 Netgear Wifi Range Extender Setup Issues

Netgear EX5000 setup issues are pretty common on most Netgear extenders. In this section, we will make sure you know how to get rid of issues when they show up on your device:

  1. Firstly, make sure the extender is connected to the wall outlet nearby the router. 
  2. Secondly, ensure your router is powered On at all times. 
  3. After that, be sure that your router is powering Off in the middle of the setup. 
  4. Login to the Netgear extender using the correct username and password. 
  5. Once you access the Netgear EX5000 setup wizard, make sure you follow the on-screen instructions carefully. 
  6. At last, make sure you configure your extender settings by referring to your router’s settings. 
  7. The issue will be fixed. You will be able to set up your extender without any issues. 

How to Reset Netgear EX5000?

For the Netgear EX5000 reset process, please ensure that you have a reason for it. You must not reset your Netgear extender without any reason, or else, your extender won’t be able to reset your device. 

  1. Make sure the extender is powered ON. 
  2. Locate the Netgear EX5000 reset button. Most likely, it will be there on the Netgear extender’s bottom or left side. 
  3. Press and hold the Netgear extender reset button for 10 seconds. 
  4. After that, release the button. 
  5. Finally, the extender will initiate the reset and revert to its original settings. 
  6. At last, the Netgear EX5000 reset will be successfully completed. 

Netgear EX5000 Firmware Update

To go about the Netgear EX5000 firmware update, make sure your extender is connected to the wall outlet. Now, follow the steps as follows:

  1. Firstly, sign into the Netgear wireless extender using 
  2. Enter the address into the address bar and hit Enter to reach the login page. 
  3. After that, enter the default username and password of your extender to login. 
  4. Next, go to the Administration page and select Firmware Update. 
  5. Finally, you need to follow the on-screen instructions to update your extender’s firmware to the latest version. 


This page was all about the Netgear Extender setup, Netgear EX5000 reset, and Netgear EX5000 firmware update process. We hope this page helped you learn everything related to the Netgear wireless range extender. Setting up the Netgear extender is super easy and it will take you a few minutes to finalize the initial configuration. 

In case you face more issues with your device, make sure you get in touch with our support team for more help.